PARAMETER:

DESCRIPTION:

 1. Any kind of compression spring can be fully described by Outside Diameter, Pitch, and Coil number. The Universal Compression Spring Former using outline description method to produce spring.

2. The Universal Compression Spring Former have a Archimedes Curve Outside Diameter CAM, After calibrated the minimum OD and the reference OD then the user can use the OD description to control spring OD.

3. The Universal Compression Spring Former has a linear pitch architecture, After calibrated the Pitch zero and a reference pitch, the user can use the pitch description to control spring pitch.

4.The Universal Compression Spring Former using the spring OD and the wire diameter to calculate the wire feeding length by coil number. the user can use spring coil number description to produce spring.

5. The Universal Compression Spring Former after finished the OD and Pitch calibration and able to produce the sealing ring spring. Any kind of compression spring can be produced within 3 minutes.

6. It can adjust the OD and Pitch without stopping the machine, Let it be Easy and Efficiency.

7. When making the tower spring, the wire feed can cooperate with the Outer Diameter changes, the product appearance is better than other machine produced.

8.C6200 have the bending device for the first coil. ( Patented ), It's very useful when changing wire during production.

 9. The Mandrel can move up/down by manual or by system through user program. Any spring OD can be cut without any additional adjustment.